Rs485 PH Sensor With Split Wire For Industry Sewage Or Drinking Water

Digital pH sensor DPH790 with separate cable technology combines the advantages of digital signal processing and separate cables, providing higher measurement accuracy and reliability.

Digital Signal Processing: Digital pH sensors use a digital signal output instead of the traditional analog output. Digital signal processing provides higher immunity to interference, which can reduce the influence of external interference on the signal, thereby improving the stability and accuracy of the measurement.

Built-in temperature compensation: Digital pH sensors are usually equipped with a built-in temperature sensor, which can monitor the ambient temperature in real time. In this way, the sensor can be automatically temperature compensated to ensure the accuracy of pH measurement results at different temperatures.

Digital communication interface: Digital pH sensors usually adopt modern digital communication interface RS485, Modbus, so that it can be directly connected with computer, PLC or other digital control systems. In this way, remote monitoring and control can be realized, while errors in the data transmission process are reduced.

Advantage:
Improve measurement accuracy: Digital signal processing and built-in temperature compensation make the measurement results of digital pH sensors more accurate and reliable. At the same time, the digital communication interface can reduce the interference in the signal transmission process and further improve the measurement accuracy.

Strong anti-interference: digital signals are more anti-interference than analog signals. Through the digital communication interface, the digital pH sensor can work in an industrial environment with severe electromagnetic interference and maintain stable measurement performance.

Flexibility and scalability: Digital pH sensors can often be used with other digital sensors and integrated into existing automation systems through communication interfaces. This flexibility and scalability make the system design more convenient, and can be customized according to the needs of the configuration.

Easy installation and maintenance: The split cable design makes the installation and maintenance of the digital pH sensor easier. The sensor section can be replaced or maintained more easily without affecting the operation of the overall system.

In general, digital pH sensor with separate cable technology combines the advantages of digital signal processing, built-in temperature compensation and separate cable, providing higher accuracy, reliability and flexibility for pH measurement, suitable for various industrial applications.

Specification:

Please click the user manual pH sensor here:

DPH7 pH User Manual-New version (1).pdf

Features＆ Advantages

• Compact all-in-one design
• Support handheld devices and in-situ applications
• Large capacity reference, long service life
• 1" NPT mounting thread for flexible installation
• Internal storage of calibration data
• Support offline calibration, on-site plug and play
• Optional cleaning connector for underwater cleaning
• Standard Modbus protocol, support access to standard industrial control system
• pH sensor split cable for easy installation and maintenance

Aplication:
Water treatment monitoring
Drinking water,surface water,water quality analyze,ground water,ect.

Industrial process monitoring and dosing control
Chemical,petroleum,paper,food and medicine,PCB manufacturing,etc.

FAQ
1. What is the measurement principle of this pH electrode?
A: The pH value potentiometric method uses the potential difference of glass electrodes for pH measurement.

2. How to judge the pH of the solution?
A: If the internal hydrogen ion concentration of the pH glass bulb is lower than the outside, the measured solution is recorded as acidic and the pH value is lower than 7; if the two are the same, the solution is neutral and the pH value is equal to 7; if the internal hydrogen ion concentration is higher than externally, the measured solution is alkaline and the pH value is higher than 7.

3. How often must the pH sensor be calibrated?
A: Depends on the type of sample:
Dirty samples and non-aqueous samples require more frequent calibration.
Depends on the required accuracy:
For very accurate measurements, at least daily calibration is required.
Depends on the quality of the electrode:
Old electrodes require more frequent calibration.

Suzhou Delfino Environmental Technology Co., Ltd. is a professional manufacturer of water analysis instruments and sensors, integrating development and production together. Our main products include online, portable water quality analysis instruments. Since its establishment, we have focused on the development and production of water quality analysis instruments.

The monitoring parameters of water quality analyzer instruments mainly include: pH, ORP, dissolved oxygen, conductivity/TDS/salinity, turbidity, SS, Chlorophyll, Blue-green algae, COD, NH4-N, NO3, free chlorine, peracetic acid and so on.

As the rapid growth of the global economy leads to increased consumption and urbanization, solid waste generation has increased significantly, directly affecting the water and wastewater treatment industry. Daruifuno aims to provide solutions to various industries and fields and create a cleaner and healthier drinking water environment for the earth.

Our products mianly application for follows industry：Municipal sewage water treatment plant, industrial wastewater treatment plant, Chemical, Petroleum, Papermaking, Food and drinking, Medicine, Electroplating, PCB plant, fish farm,Lake/river/ocean/groundwater/surface and so on.

Our company was established in 2015, but our predecessor has been committed to the water quality testing industry for more than 10 years. At present, we have our own R&D center with many senior engineers with more than 10 years of experience in the research and development of water quality analyzers and water quality sensors, and are equipped with strict front-line production workers, professional quality inspection personnel and testing equipment to check every process.

As a high-tech enterprise in China, our production is strictly in accordance with ISO9001 from raw material sources to finished equipment. After years of efforts, the company has obtained more than 20 patent certificates, high-tech enterprise certificates, CE, SGS, etc. He has accumulated rich practical experience in the field of water quality testing and has unique insights in the field of water quality testing.

Our company takes "reasonable prices, efficient production time, and good after-sales service" as its purpose and adheres to the business philosophy of "based on quality and creating value for customers". At present, the company is actively exploring the international market and actively promoting its own brands and products. It has been exported to Asia, Southeast Asia, Europe, Africa, and South America, with customers in more than 50 countries and regions around the world. And hope to develop together with customers for mutual benefit with high-quality products and sincere services.